10pcs 450mm Aluminum Alloy Silver Welding Rods Tools For Cracks Polish & Paint
- List PriceUS$4.00piece
- Sale PriceUS$4.00piece
- ShippingFree Shipping
● Excellent corrosion resistance.
● Minimize parent material distortion during welding.
Light the torch, (fire shall not betoo small, to be able to easily burn pipe next to the heat sink). End of burn (preferably vertical burning, the torch can be slightly higher, with blue flames), in the burning process on the electrode heating and welding solder powder on powder put it on the stick. With solder powder and try paddling at the required welding welding electrode, such as temperature, just like water into welding electrode. If take off the non-stick electrodes continue to the end of heating. (Not deliberately used in the welding process the flame burned electrodes, or keep it vertical burn status. Uploaded under the electrode will depend on melting temperature. Upon close you will find that the electrode is first melted under). Which is why cold electrodes can be causes of welding very thin aluminum parts. Wash after welding to weld solder powder, finished.
Material: Aluminum alloy
Melting temperature : about or < 480° C
Application:Aluminium and aluminium alloy welding,brazing
Recommended for welding or brazing aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0
10 x Welding Brazing Rod